Utah Medical Products Inc. Veri-Test Pressure Checker

Allows for non-invasive verification of pressure sensor calibration.

$1,337.66
Part Number
  • 650-950-P
Manufactured
Includes
Availability
  • Call for availability
Product Manual

Features

  • Tester operating pressure range:
    • -6 to 10psi, with 0.01psi resolution
  • Simulator operating pressure range:
    • 0 to 5.8psi, with 0.01psi resolution
  • 60 to 105°F temperature range
  • Accuracy:
    • -6 to 5psi, ±1% or 0.02psi whichever is greater
    • 7.5 to 10psi, ±2% or 0.02psi whichever is greater
  • ±0.15% full scale output repeatability
  • Battery-operated for portability
  • NIST Traceable

What's in the Box

  • Operating manual
  • 650-905 4ft connecting tube
  • Four-way stopcocks with luer slip

The Utah Medical Products Inc. Veri-Test Pressure Checker is a small, calibrated hand-held device designed for non-invasive verification of the proper functionality and accuracy of single-use pressure sensors. Veri-Test incorporates a specially designed pressure cylinder and a precision, solid-state transducer to generate and measure static pressure from -6 to +10 psi. The adjustment knob is used to regulate the pressure, and the pressure value is shown on the liquid crystal display. The built-in pneumatic port also provides an external connector for stopcocks or pressure fittings.

Verifying Sensor Accuracy

When using the BioPharm HP-PRT sensor with its test port, which vents the backside of the sensor to the atmosphere, Veri-Test's unique design allows calibration of the system without accessing the fluid path. Veri-Test can be connected to the cable test port, and by applying a vacuum, the system accuracy can be verified non-invasively.

Verifying Monitor Accuracy (Simulation Feature)

The Veri-Test's simulation feature allows the user to simulate the sensor and verify the calibration of a pressure sensor monitor. This is performed with a second transducer housed inside the Veri-Test monitor connector. This transducer is pneumatically connected to Veri-Test's pressure vacuum pump and electrically connected to the monitor through Veri-Test's monitor connector and a reusable interface cable.